Go to►https://drinkag1.com/tavarish to get started with AG1 Next Gen for less than $3 a day when you subscribe. Thanks to AG1 for sponsoring today’s video!
——————————————————————–
This is the biggest McLaren P1 rebuild episode yet, and we start off taking the chassis of the car completely apart so we can finally get all of the sand out (hopefully). That includes turning it nearly upside down on a rotisserie, and things kept going downhill from there, until I got an insane offer to talk to Frank Stephenson, the original designer of the P1 to work together. I am not worthy…
——————————————————————–
Special Thanks to Frank Stephenson Design►https://www.frankstephenson.com/
——————————————————————–
Join my Channel for special perks ►https://www.youtube.com/channel/UCvAhDxNNUDhi78tMXVGBUaQ/join
Subscribe! ►http://bit.ly/2xZGtYN
Instagram ►https://www.instagram.com/therealtavarish
Tavarish Shirts and Merch! ►http://bit.ly/shoptavarish
——————————————————————–
Thanks to the companies that support this channel!
Valvoline – The Original Motor Oil►https://www.valvolineglobal.com/
Find your dream car on AutoTempest!►https://bit.ly/foundonautotempest
Dryce Nation►https://www.drycenation.com/
AZ Cycle Parts ►https://azcycleparts.com/
Nagengast►https://nagengast.pl/en/about/
Unobtainium Welding►https://www.unobtainium.ca/
Luxury Choices►https://www.instagram.com/luxury_choices/?hl=en
——————————————————————–
Clips used: https://www.youtube.com/watch?v=V518grCwsfg
Tom Freda► http://www.tomfreda.com
——————————————————————–
Questions? Comments? Business inquiries? Email me at asktavarish@gmail.com
——————————————————————–
My Garage Equipment:
Simiron Epoxy Floor Coating►https://simiron.com
Bendpak Lifts and Equipment►https://bendpak.com
Levrack Shelving and Storage ►https://levrack.com
——————————————————————–
source
About Post Author
Tavarish
Average Rating
47 thoughts on “Rebuilding A Flooded $2,000,000 McLaren P1 | Part 16”
Comments are closed.
More Stories
It looks like a GTR but costs way less
Is a Skyline GTT just as good as a GTR for a fraction of the price? Let’s find out. If...
I Attempted Impossible Trails: Level 3
Thanks to WD-40 Brand for sponsoring this episode! Shop the products that helped us on the road at an AutoZone...
WhistlinDiesel’s cameraman is facing 5 years for this!
Find your dream watch with Menta Watches - https://vinwiki.com/r/menta24 Keller More from the @whistlindiesel & @wildcat channels shares the story...
Japan Has a Stolen Ferrari Problem
For decades, priceless and one-of-a-kind Ferraris have been stolen out of Europe and smuggled into Japan by one of the...
I Bought a $100k Corvette Z06 just to destroy it
Sorry Corvette enthusiasts, you're just not terribly important to me :) MUGSHOT MERCH https://whistlindiesel.com/ source
How do you make a McLaren do a WHEELIE???
Check out the latest tires from Bridgestone - https://vinwiki.com/r/bridgestone25 Follow Ivan and @arnesantics3536 at @cannonballgarage VINwiki Merchandise - https://store.vinwiki.com Try...

Who stuck around until the end?
#3 looks the best suddle but mean and aggressive…… is that a hint to the next project? 🤔 😊😂
The gold render is the one!
The design of 1 looks wild, in combination with the red you created would look stunning! Can't wait to see it on the roads
0:50 That does not look good …
It has taken ages. Yet looks like the project failed ???
Can you bond carbon with 5200 slow cure. I’m assuming that’s what they did here.
I like the gold sketch
Would you finish it already?!🐧
That manifold is a work of art!
I love all 3 designs, but I'm not fond of the wings on the first two.
Version 1 Gold is insanely good looking
Wow it's like they made a new version of the W1 I prefer the red model with the big wing
Design 3 with a low subtle spoiler out back
Id definitely do the second option, with the third coming up at at a close 2nd place.
I prefer the gold one, I like the floating wheel disc design like on the Speed Tail, and I know this car is going to be worth an absolute fortune when it's finally complete. Not only due to the work put into it, but the mark it's going to leave on the car community. It not only took a village to make this car a reality, but it took THE WHOLE WORLD!!!
After 7 months of absolutely Zero updates on this project, 14 months with only 3 uploads, keeping the fans out of the loop completely yet somehow he has the shameless audacity to ask for members. Almost as if coming back whenever the money runs out to your fans and then running away for months on end.
Not just that, not just providing zero updates on it, the video that comes out still has the same pathetic "I haven't done this so I'm gonna do that and then wait a couple months more for it to be done"
But hey at least the lights are working and you blew some sand out again and "cleaned" stuff that could've been done months ago. Absolute joke
No need for eye protection at 15:42 since you already have the safety squints
Working with Stephenson=EPIC!
Fun fact, it cannot save you from a deadly virus. That mask in particular says not for medical use on the box it comes in and is just a cheap version of a true n95 filtered mask. That mask does nothing but limit potential oxygen intake….
Design 3 with the original wing looks best in my opinion.
The gold first one 👍
Wait 16 Grand for just brake pads? So when you brakes a done that's how much you have to spend to buy them? What are they made of, Neverending material?
Man you need some AC in the workplace it looks like its really fucking hot in there 🤣
4:50 I reckon they call that a McLaren P1 LE (Lechon Edition)
The third design has to be it. It meets that perfect balance between crazy and beautiful. I think it keeps the spirit of the original p1 but takes it to the next level.
Love Franks YouTube channel and his designs!
The first render is what fits the sheer ambition of this project the most. A design that will go hand in hand with the immense amount of work and engineering it has taken to get it to this point. It will bring all of it together and make the P1 Evo the true final iteration of this legendary car.
All the ads and sponsor spots are soooooo egregious. Every YT’er is a scumbag now. Unfollow and unlike, go get a real job clown.
We LOVE the GEEKY parts!!!!!!
Third concept is perfection, classy and understated yet looks insanely fast.
I think the second one, first design is cool but a little much, the Mohawk style of the third looks a little eh from certain angles
Number 1 is INCREDIBLE
A cliffhanger!
Designs look awesome, however your previous rendering looks best.
Definitely number 3🔥🔥🔥🔥
I’m for the Le Mans prototype look. The big wings scream my car is not so good so I mounted a shopping cart handle.
Gold design 👍🏻👍🏻👍🏻
Wow! That gold design is phenomenal.
Dude I love how willing you are to keep investing in this project at new levels every time an opportunity comes up! Wishing you all the best moving forward. So stoke for the final render and having frank involved is just a dream! Render for me but the gold has surprised me it’s super lush!
God bless bro x
You are really taking things to the next level. From humble beginnings … you are truly soaring.
1
I swear this project has been going on for about 65 years 😂
my choice wil be 58:39 …once this drives on road .. McLaren will be jealous
Well you could have bought an Corvette ZR1X…..hind sight!
When done with your P1 call it the P1 Phoenix.
Go full crazy, you are not on this journey to be shy
Second!