Read Time:3 Minute, 27 Second
Welcome to Just Rolled In!
For today’s episode, we have some customer states photos and videos from all around the web and sent in by subscribers! If you have any questions about any of the photos or videos, feel free to ask in the comments. Also, check out the bottom of this description for more information about each photo & clip.
Hope you enjoyed the video and please consider subscribing. Thanks for watching!
If you want to submit your customer states photos/videos or car pictures, you can do so via our website.
https://www.justrolledinyt.com/
👉(Not all content sent in will be used and it MUST be yours)👈
Just Rolled In Merch (all profit from merch sales donated to local foodbank)
https://www.justrolledin.shop/
👉Follow Just Rolled In on Social Media👈
Facebook – https://www.facebook.com/justrolledin
Instagram – https://www.instagram.com/justrolledinyt/
TikTok – https://www.tiktok.com/@justrolledin
Here’s the last video, just in case you haven’t seen it yet:
https://youtu.be/5CccxEFLrbQ
Credits:
https://www.tiktok.com/@jamescarter054
https://www.tiktok.com/@417_the_punisher
https://www.tiktok.com/@vinnysautodetailing_
https://www.tiktok.com/@the_homeless_mechanic
https://www.tiktok.com/@sumojimenez
https://www.tiktok.com/@ifistedabear2
Each photo & video described.
These videos are meant to be educational but also funny, so if you have any questions don’t hesitate to ask!
0:00 Intro
0:05 No issues found. The customer didn’t say anything when they picked up the vehicle.
0:20 This is exactly how the vehicle came in. Castle nut then the cotter pin gets installed afterward is how it’s supposed to be. A cotter pin is a simple fastener that’s used to secure a bolt in place.
0:35 The technician said: “The noise was from the damage to the front brake rotor backing plates being damaged and rubbing on the rotors. He had also cut the exhaust pipe in front of the fuel tank and did not have a turndown. That fuel tank is on borrowed time. He declined all of the work. Hopefully, he fixes it without hurting himself or others.”
0:49 Sway bar links were improperly installed as shown in the clip.
The customer came in for an alignment but the technician had to re-install the sway bar end links correctly and do some other repairs.
1:09 Nuts for u-bolts came loose, only 1 left holding the one u-bolt on. The mechanic said the truck’s steering was all over the place, and he is surprised the customer did not mention anything about it. He is also not sure who installed the new front brakes and didn’t notice any of this.
1:22 Just like the fuel shark we showed in a previous video. This is a gimmick. The closest information the mechanic could find about these was on a website – https://mundi.com/product/epm-vortex/
Supposed to improve fuel mileage, etc… but it’s just a gimmick a lot of people far for.
1:41 Customer’s car needs a new engine.
1:55 Customer tried fixing brake lines with JB weld and just used a fuel line as a brake line. This is never the way to fix brake lines, and the whole line should be replaced.
2:02 The meat was expired by over 2 weeks.
2:12 Engine and transaxle look to be both very damaged. The vehicle will most likely be a write-off.
2:26 Customer drove over this on the highway and heard a loud noise. They brought it into this shop to get it removed, and then said they will be going to a body shop to get the hole repaired.
2:34 Some new windshield wipers have plastic covers on the blades so they don’t get damaged. The customer left them on when they installed the new wipers.
2:43 Not sure who installed the Nike slider as a sway bar bushing but the mechanic had a good laugh when they saw this. If it works, it works!
2:52 Just a joke of a subscriber working on his car.
2:57 Outro. Thanks for watching!
source
Happy
0 %
Sad
0 %
Excited
0 %
Sleepy
0 %
Angry
0 %
Surprise
0 %
0
0
42 thoughts on “Customer States Temperature Not Warm In Car | Just Rolled In”
Comments are closed.
Submit your photos/clips at http://www.justrolledinyt.com
Thanks for watching!
Well, at least the castle nuts and ball joints were still there 🤔
2:53 bonk sound
I can't believe that one customer never thought to turn the knobs on his heater, Makes you wonder how he got his driver's license.
After seeing some of these "repairs", I'm thinking there needs to be a waiting period in hand tools.
Vortex Air Optimizer 😎
That meat chilling in the car is probably the most expensive fail I have seen on this channel to date!
Saw another copy-cat channel suggested by YT. No where near as good as this channel with the comments. Plus the other one was full of profanity and innuendo. I did the "Don't recommend this channel" on it. Great job in here!
I'll be the first to admit I'll only do my brake pads, rotors, oil changes, after that I'll have a garage do it. Some vehicles can get tricky or have be very specific ways things need to be done for repairs and I can only trust my ability so far when my families safety is on the line.
These videos never cease to amaze me. The stupidity of people. Bonkers.
Wait….so those ball joint cotter pins aren't to prevent you from overtightening the castle nut?
I cant tell if being a mechanic is hard to easy with these videos. Some wild stories you just roll in and they are just awesome.
I'm really curious about the thought process of a person that brings a smelly car to a mechanic instead of cleaning it
2:11 my car smells weird, I only used it to hide a body and go grocery shopping. I know I got rid of the body but still have the dead smell. well we found a pound of meat left in the car, its spoiled now
I don't see anything wrong with the work done to any of the cars, they are just expressing their artwork. You have to remember this is only kindergarten after all. A for effort.
I have no words
im too stupid to understand 99% of these,
I dont know a lot about cars, but doesnt the pin go after the nut to hold it in place?
I did the wiper blade one the first time I replaced them. >.>
Well, 2 options here, the customer is the idiot we suspect them too be.
or they're definitely stoned
I really enjoy these videos, because as a non-car person, I literally have no idea what's wrong until they point it out. Lol.
the mallet bonking the manifold sound
I fix NOTHING. My neighbor thinks I'm a sissy for it. "Not a real man" Yet, he's always fixing his trucks. Like, twice a week. I go to my shop, tell them what's wrong and hand over the credit card. Great to have an honest shop.
1:28 What are those Vortex Air things even supposed to do?
There should be an excruciating test to be able to buy this kind of machinery.
Actually make a test for every aspect of life, specially child bearing.
Some people shouldn't even own vehicles.
Video could also be named "Video that brings the german TÜV to cry"
1:21 This is the peak of technology from the 41 millennium.
1:45 what do you think the issue was?
This video sure a lot of fun to watch if you know wtf this guy is talking about xD But i am not a car guy. xD
2:13 that looks like a volvo 5 cylinder and I'd probably guess it's on a P1 chassis, which….yeah the oil pan is the lowest part of the car and people smash them a lot lmao
This is one of the many reasons I quit my once "dream job" of being a mechanic after just over 1 year. That and men didn't take me seriously, "where's your dad?" "Let me talk to the man of the place?" "Is there a man around here?" Got old quick.
Lmao.. whoever drove that car in & didn't turn the heat up wow. You should've asked'em "Hey got any TVs with volume issues? I'll fix each one for a mere 50$ if you got the remote or if the buttons are still on the TV it's self…"
this shit is fucking scary!
I was wondering how the mechanics keep a straight face when explaining to the customer that they just needed to turn the temperature up. Seriously, how do you not laugh when you explain that? Lol
OK for real – the nikes are looking like they actually could do some kind of job there.
When you know nothing about automotive repair or mechanics and can still immediately see when something isn't right. Or can grasp the immense danger some of these drivers are putting themselves and others in with their insanity. Removing your shocks entirely… Driving around with little steering control and loose bolts barely holding your wheels together.
I don't even drive and I can feel slight changes in a vehicles performance as a passenger.
america
that "gaming engine" really made me laugh out loud 🤣
Well, that car sounds like videogame indeed.
"Engine sounds like a video game" Ecotec….Game over i'd say.
Windshield wipers didn't used to come with covers, I noticed it when my brand new wipers weren't working too. I laughed when I found the bright yellow covers on them.